Elektrine
Log in Register

#luthier

12 posts · Last used 14d

Back to Timeline
dusepo
Jo Dusepo :oud: جوهانا دوسپو @dusepo@toot.dusepo.co.uk · Jul 31, 2026
Jo Dusepo luthier | https://www.dusepo.co.uk #lute #oud #gambus #barbat #luthier #lutherie #laute #laúd #medievallute #liuto #luteria #lutheria #ούτι #laudarabe #ud #worldmusic #earlymusic #lutemaker #musicalinstrument #عود #oud_maker #music
8
0
4
cryptax
cryptax @cryptax@mastodon.social · Jul 30, 2026
Je cherche un réparateur de confiance pour mon hautbois, proche des Alpes Maritimes (06). Il a ~50 ans, et besoin de révision. Je sais expliquer les problèmes (mais pas les résoudre lol). J'ai cherché jusqu'ici sans succès. Je cherche qqun d'honnête, qui sait comment réparer un hautbois (pas qqun qui révise un hautbois tous les 5 ans). Re-post bienvenu. #alpes-maritimes #hautbois #luthier #vent #bois #musique #reparation #oboe #repair
0
0
22
punishmenthurts
Goiterzan/Amygdalai Lama @punishmenthurts@autistics.life · Jul 05, 2026
Replying to @punishmenthurts@autistics.life
ah, I’ve a devil of a choice now, keep shaping this fretboard, do the next thing, finish the job when the neck may just snap off again, or tune it up again now, snap it again now? . I don’t see anything on the wood glue bottle about curing, just clamp for 25 minutes, and I had gotten it all wet first so I left the clamps on overnight JIC, do I test it now or is it too soon? . Is there a #Luthier in the house? . /30 #Guitar #Framus12StringProject
1
1
0
punishmenthurts
Goiterzan/Amygdalai Lama @punishmenthurts@autistics.life · Jul 05, 2026
Replying to @punishmenthurts@autistics.life
I love you guys but nobody answers goddam questions. 😠 . I decided that what I needed to do besides gluing the break was making it strong as I can from the other side, the fretboard side, meaning take not another millimetre off of the fretboard at that end and attaching the new one as solidly as possible. . Plus I decided that’s structural, and I ought to finsh that first, before I start worrying about shape - plus I realized it’s a new fretboard, no frets yet, so no reason it’s the under piece that has to be shaped. . So I can go back to a normal sequence, shape the final top fretboard instead. If I sand through the fret slots, I have a fret saw, I can just cut them again. . I took it off, one time only, took the peak off the under piece one last time and glued the new one on again, and was not miserly with the glue, that ought to be permanent. . Thanks for nuthin’ kids 😀 . /31 #Luthier #Guitar #Framus12StringProject
1
1
0
punishmenthurts
Goiterzan/Amygdalai Lama @punishmenthurts@autistics.life · Jul 06, 2026
Replying to @punishmenthurts@autistics.life
It’s white wood glue in the break, although I think I saw Julian do something on The Repair Shop using some super strong polymer glue. I don’t have that of course and not sure what to buy, so I tried the white stuff, and if that doesn’t work, I’ll still have that to sesrch for and try. . the fretboard is on with that horrible to use Titebond Liquid Hide Glue, so in theory it could still be re-done if need be. Did the repair last night and the fretboard this afternoon and I have other things tomorrow so by the time I’m planning to take the clamps off and mess with it, it will be tomorrow night, everything should be as set as can be. . Then I’m back to putting the “e,” strings on, drawing my lines and paring it down to size. . It’s a two edged sword: I invest more labour in a perhaps still broken neck, but if I take the time and I do, the glue is probably continuing to dry and cure while I do. . And that’s my decision right now: shape it as much as possible - the width is certainly possible - before I test the break again and if that holds, see the amount of flex and start shaping the top. . /32 #Luthier #Guitar #Framus12StringProject
1
1
0
punishmenthurts
Goiterzan/Amygdalai Lama @punishmenthurts@autistics.life · Jul 06, 2026
Replying to @punishmenthurts@autistics.life
nope, changing that plan now, going to carve the width and the back /shoulders a bunch, maybe finish it, to taste sort of thing before I ever tighten the strings. . I’ve another little problem, I’m squeezing the spread of the strings all around, that’s why all my saddles are notched, and first, I did pretty good for proportions on this saddle - except the low “G” string is too close to its mate, I need somehow to move that over a bit. But the larger issue is see the pic, you can’t squeeze your string spread on a 12 string, there’s no wiggle room. . I’ve been thinking I would try to take the sides off of the forward bridge pins, but I just had an incrementally better thought, to lop the tops off of all six of the forward ones. . Something has to be done. They’re going to pop out like bullets. . /33 #Luthier #Guitar #Framus12StringProject
2
1
1
punishmenthurts
Goiterzan/Amygdalai Lama @punishmenthurts@autistics.life · Jul 07, 2026
Replying to @punishmenthurts@autistics.life
I’ve got the fretboard width almost where I think I want it now, almost down to the width of my smallest 12 string nut - and Good Lady, with that fresh, full new fretboard right now it’s as round and fat as the fattest guitar neck from a hundred years ago. . I can’t touch finger to thumb around it anywhere, not even close. A lot of work yet, and an adequate outcome is growing more unlikely by the day. . But hey, as Mom used to say, can’t dance and too fat to fly. If it doesn’t work out, I can still butcher and convert it like the other one. 😀 . (Geez, that’s a great title for a disabled person’s autobiography, huh.) /34 #Luthier #Guitar #Framus12StringProject
1
1
0
punishmenthurts
Goiterzan/Amygdalai Lama @punishmenthurts@autistics.life · Jul 07, 2026
Replying to @punishmenthurts@autistics.life
Well, the second idea was way worse, but I’m stoked about the first one, that’ll do. . . . . . . . Donkey 😜🙄 You may have to zoom in a bit 💜 . The spread doesn't look great, but the strings aren't tight. I'm putting that off as long as possible for the repair to cure, but I wanted them on, even loose to finish shaping the width. I made a little change for the "G" string notch, turned out it was the octave one that had to move, and I tightened those ones momentarily to check, and it's better. . /35 #Luthier #Guitar #Framus12StringProject
2
1
1
eyesquash
Scott the F is implicit Baxter @eyesquash@mastodon.world · Jul 01, 2026
I want a thinline Telecaster with a P-90 neck pickup, four knobs, and a left-handed bridge plate. Maybe a 7-1/4" radius. #guitar #luthier #GearSquad #dreams
1
0
0
dusepo
Jo Dusepo :oud: جوهانا دوسپو @dusepo@toot.dusepo.co.uk · Jun 30, 2026
An original composition of mine: https://www.youtube.com/watch?v=GbnhJKe065I Jo Dusepo luthier | http://www.dusepo.co.uk #lute #oud #gambus #barbat #luthier #lutherie #laute #laúd #medievallute #liuto #luteria #lutheria #ούτι #laudarabe #originalsong #ud #worldmusic #songwriting #lutemaker #tanbur #musicalinstrument #عود #oud_maker #femalemusician #womenmusicians #music #musician #composition #تنبور
6
0
1
andrewscutehell
Cadaver de cuervo @andrewscutehell@cascarilla.social · May 01, 2026
Primer clavixeiro que fago practicamente listo salvo por unhas mans coa lixa. Verdaderamente un dos procesos máis divertidos xunto facer as clavixas no torno 😁 #zanfona #hurdygurdy #luthier #luthiery #woodworking
10
2
4
andrewscutehell
Cadaver de cuervo @andrewscutehell@cascarilla.social · Feb 21, 2026
Co clavixeiro adiante! #zanfona #hurdygurdy #luthier #luthery #woodworking
1
0
2

You've seen all posts