Post #2553847
2026-04-11 17:38 UTC
Replies (1)
-
@rune@social.intothecloud.net 2026-04-11 18:39
@ironicbadger@techhub.social Yeah, here's how I have it set. First is the actual relays, interlocked, then virtual buttons that show up in homeassistant, and finally physical buttons that mirror the virtual ones. ``` # The Relays connected to the GDO switch: ## Pin19 -> Relay -> GDO IN1 - platform: gpio pin: GPIO19 id: relayr name: "Relay R" internal: true interlock: [relayl] interlock_wait_time: 255ms on_turn_on: then: - delay: 250ms - switch.turn_off: relayr ## Pin18 -> Relay -> GDO IN2 - platform: gpio pin: GPIO18 id: relayl internal: true name: "Relay L" interlock: [relayr] interlock_wait_time: 505ms on_turn_on: then: - delay: 250ms - switch.turn_off: relayl # Virtual "buttons" for GDO, shown in homeassistant button: - platform: template icon: mdi:garage id: garage_opener_left name: "Garage Door Opener Left" on_press: switch.turn_on: relayl - platform: template icon: mdi:garage id: garage_opener_right name: "Garage Door Opener Right" on_press: switch.turn_on: relayr binary_sensor: # Physical GDO buttons ## Pin5 -> Switch Pin1 + 10k -> GND - platform: gpio pin: number: GPIO5 mode: INPUT_PULLDOWN name: "Garage Door Left Button" internal: true on_press: switch.turn_on: relayl ## Pin17 -> Switch Pin1 + 10k -> GND - platform: gpio pin: number: GPIO17 mode: INPUT_PULLDOWN name: "Garage Door Right Button" internal: true on_press: switch.turn_on: relayr ```