← Feed

Posts

• Post #4400286

  RE: https://sfba.social/@cvvhrn/117044454315024909 Odd that I see this today. I'm wearing a shirt with the carpet pattern.

• Post #4139673

  This is the first I have heard this #EDA tool. It's a fork of KiCAD, but doesn't look like it's been updated in over a month, nor does it look like it has a user base. How ever, it sounds interesting. https://www.zeo.dev/ #Electronics #PCB #Schematics

• Post #4077232

  Queso papas de la gordo gringo: Wavy cut potato chips Cheddar Cheese Make one layer of potato chips on a microwave / oven safe plate. Cover with shredded cheese. Add another layer of chips covered with shredded cheese. Repeat till you run out of both.. #recipes #recipe

• Post #3973878

  In the continuation of going broke on Etsy: The M-VAVE SMC-PAD improved sensitivity modification. https://www.etsy.com/listing/4541142892/m-vave-smc-pad-sensitivity-fix-mod #MVAVE #SMCPAD #MPC #MIDI #DrumPad #FingerDrumming #KoalaSampler

• Post #3961520

  RE: https://mastodon.social/@nixCraft/116952684993082660 The differences can be anything you want them to be, especially when you find out there is no OS.

• Post #3897043

  I'm submitting my most #Texas #Recipe: The Texas Corny Dog: Hot dog bun. Chili (no beans) Cheese Onions Mustard Deep Fried Corn Dog. #food

• Post #3895336

  #Meshcore #Meshtastic #Antenna https://github.com/ellisgl/915-mesh-antenna

• Post #3748751

  People of the #MagicVLSI community, is this useful?#VLSI #Silicon #ASIC #GF180mcu #TCLTK #Tools https://gist.github.com/ellisgl/9e310044a7b0ba08d3c0bf9d441ad0eb

• Post #3739524

  Man, Vine didn't last very long at all, did it?

• Post #856775

  @mos_8502 Start learning NCURSES.

• Post #585066

  If #LoG (#LoopOnGround) antennas aretrending in the #ham_radio world for their lowered noise floor for RX, and if #möbius loops are also known for their lowered #RX noise floor, why have I seen a a large möbius loop on the ground? 🤔 #hamradio #antenna

• Post #585065

  INPUT = 00001101 ROL|00011010|Rot Left SOL|00011011|Shift 1 Left SZL|00011010|Shift 0 Left SIL|00011011|Shift Inv Left ROR|10000110|Rot Right SOR|10000110|Shift 1 Right SZR|00000110|Shift 0 Right SIR|00000110|Shift Inv Left INV|11110010|Inv INH|11111101|Inv High Nib INL|00000010|Inv Low Nib INE|10100111|Inv Evn Bits INO|01011000|Inv Odd Bits IEH|01011101|Inv High Nibb Evn Bits IEL|01011101|Inv Low Nibb Evn Bits IFB|00001100|Inv 1st Bit

• Post #585064

  If I were to make a drug, it would be triphosphorus pentakaidecanitrogen. So people would say the need to get their hands on some triphosphorus pentakaidecanitrogen. #chemistry #joke

• Post #585063

  Hopefully it's the Uno R5, that the R4 should have been. The R4 MCU, was such a let down. https://share.google/2UNLTpsk5rXfX3dpI

• Post #585062

  @mos_8502 or you could use a SPDT button, and an SR latch

• Post #585061

  An interesting #CPU I haven't seen used on a home brew computer; is the HuC6280. Basically it's the #65C02, with a couple more instructions, more memory handling and a nice audio engine. #6502

• Post #585060

  My prediction for the next #RaspberryPi is they will have baked up their own CPU. Most likely a RISC-V. Of course, given my predictions in the past, this will be completely wrong.

• Post #585059

  So I've jumped on the #6502 bandwagon. I've been taking Ben Eater's 6502 setup and put it on a Tang Nano 9K #FPGA. #mos6502 #6502asm #verilog #hdl https://github.com/ellisgl/TN9K-BE65C02

• Post #358001

  With 1000hz monitors coming out, can we get a 13" 4:3 640x480 version? I'm sure you could probably squeeze a couple more hertz of that. If you are wondering, this would be great for emulating CRTs.