Elektrine lite

← Feed

@tubetime@mastodon.social

2026-09-27 01:53 UTC

this thing is puzzling. it takes the place of the ball-in-tube inclinometer. it seems to be added after the fact. the thing is glued in place, has a resistor divider (100 ohm low side, 5.3K high side), and has been wired up to 2 spare pins on the connector with a different color of sleeving.

Replies (1)

  • @tubetime@mastodon.social 2026-09-28 00:49

    think i figured out why this was bodged in: it's replacing a ball-and-tube inclinometer because this may have been installed in a stationary setup, like a simulator, and they needed to emulate the motion of the ball.

    Open ##4876047