2026-09-27 17:19 UTC
@Olem@oldbytes.space @root42@chaos.social
distinguishing between (H)CMOS and (LS)TTL is pretty easy:
Connect a resistor of some hundred kiloohms from input to ground
If the input is recogniced as "LOW" and you measure no voltage at the pin, its definitely some CMOS family
If the input is recogniced as "HIGH" and you measure something 1 to 2 Volts out of this pin, its most certainly from the TTL family (or a damaged CMOS)
Replies (1)
-
@Laberpferd@sueden.social 2026-09-27 17:21
@Olem@oldbytes.space @root42@chaos.social With a Potentiometer, or probably its enough to key in some specific resistors, you can distinguish TTL from LSTTL, HCT from HC and if its a Schmitt-Trigger with hysteresis or a plain input without Something similar for the output levels, if they are almost perfectly 0V or Vsupply its a CMOS family, if they are like 0,1V LOW to 3something Volt HIGH its TTL family or HCT