Elektrine lite

← Feed

@bashibazouk@lemmy.world

2026-10-21 15:14 UTC

Get the batteries out and wipe the electronics with a soft towel soaked with a little vinegar to neutralize the corrosion. Then a damp towel with just water to get the vinegar up. Let it fully dry before putting in new batteries. This happens to batteries that have sat unused for a long time. It can also happen if at the end of charge, you pull the batteries out, and put them back in to squeeze a little more use out of the batteries. Do it too many times and there is a leak risk. Cheaper batteries do it more often but the top brands will occasionally leak as well.

Replies (5)

  • @B0rax@feddit.org 2026-10-21 15:21

    Vinegar here really does the trick in neutralizing the acid. do not skip it!

    Open ##5183141

  • I found an old plush that had a voicebox in it… I’ve not touched it in 25+ years but wanted to show it to my daughter, so I pulled out the battery box, expecting the worse, and there was no corrosion at all. I pulled out the generic brand batteries and put in new batteries and it started speaking. I was amazed.

    Open ##5184710

  • How does vinegar compare to a can of CRC?

    Open ##5184905

  • @4grams@awful.systems 2026-10-21 20:05

    This is the way. Sometime I even file down the spring/contacts with a nail file to expose fresh metal rather than corrosion. Just a few light scratches helps greatly.

    Open ##5187880

  • Why not just switch to NiMH rechargables? Upfront cost is a bit higher, but considering the 10 or so year lifespan in a TV remote, they make sense. And they don’t leak.

    Open ##5194124