Post #2835800
2026-02-02 06:50 UTC
@sapphire@shortstacksran.ch that looks beautiful
I've just found it difficult to get perfect geometry with the auto-supports/orientation with Lychee slicer, there's always warping. The last print (not pictured) is looking like it might be okay, I've ordered some 2x1mm magnets, just need to see if they'll work. In the vid you can see how bad it is with light leaking and warped base, I'll just keep tweaking it and stuff
Replies (1)
-
@sapphire@shortstacksran.ch 2026-02-02 06:53
@anonny@pone.social I always do way more supports than I need and thicker than necessary. Best to have the model mount such that the supports connect to the bottom and rear of the piece so you have less finishing work Your resin also has a huge impact, of course make sure you’re using the right wavelength but sometimes brands just don’t like certain printers. I’ve had a lot of success with anycubic resin in mine but I had one I bought for an odd color choice that was just awful, barely wanted to come together with my printer