Post #2439628
2026-04-09 16:48 UTC
The 3 key on my @frameworkcomputer Laptop 13 stopped working. I disassembled it to see if theres something that needs to be cleaned and I got into a few hickups
- The jumpers are glued to the metal frames. Especially the fingerprint cable was glued to the silver bracket AND the rest of the frame, making it impossible to remove the silver bracket
- The touchpad jumper cable is glued so closely to the connector that it cant be inserted without bending. Didn't work at first reassembly, but at 2nd
Replies (1)
-
@librico@mastodon.online 2026-04-09 16:51
@frameworkcomputer@fosstodon.org - Step 11 in the keyboard replacement guide is missing a screw that looks like all the ones that have to be removed in the step (right to the backlight cable on the black area). It is already removed in the picture. I dont think I missed it? Should maybe be marked to avoid confusion But alas, after cleaning, reassembly, half my keyboard not working because of the glued jumpers being hard to insert, reassambling again, its back in full working order