Post #1949227

@yngmar @smallsolar built one of those a few years ago. The hardest part was to find a suitable panel in terms of "small but extra thick frame for maximum sturdyness". 200W panel, 300W inverter limited (to stay below the legal limit for overall power fed into the grid). I opted for cheap surplus/scratched steel legs mounted with excess 19" rack mounting screws. I used rubbery plastic spacers to help with the bending force applied to the panel frame. The panel has protective plastic covers on the corners. If drilling holes into the frame, put a cloth and a piece of wood anside to not hit the plastic surface with the tip of the drill. I used two aluminum rails to mount the inverter. As those inverters are potted I just removed four screws that hold on the cover and replaced them with slightly longer ones that go though holes on the aluminum profiles.